Dell D19M Panduan Pemilik - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Desktop Dell D19M. Dell D19M 28 halaman.
Juga untuk Dell D19M: Pengaturan dan Spesifikasi (20 halaman), Pengaturan dan Spesifikasi (30 halaman), Panduan Memulai Cepat (16 halaman), Panduan Pemilik (37 halaman), Pengaturan dan Kation Spesifik (27 halaman), Pengaturan dan Spesifikasi (18 halaman), Manual Pengaturan dan Spesifikasi (34 halaman), Pengaturan dan Spesifikasi (15 halaman), Pengaturan dan Spesifikasi (17 halaman), Manual (16 halaman)

Dell D19M Panduan Pemilik
USB Emulation
SW Guard Extensions (SGX)
USB Configuration
Power Options
SMART Settings
Table 6. — Security
Unlock Setup Status
Admin Password Status
System Password Status
HDD Password Status
Asset Tag
Admin Password
HDD Password
System Password
Password Change
Firmware TPM
Default: disabled
Allows you to enable or disable the USB emulation.
Default: Enabled
Allows you to enable or disable the SW guard extensions (SGX).
Default: Disabled
Allows you to enable or disable the USB ports.
Front USB Ports: Enabled
Rear USB Ports: Enabled
Allows you to modify the power options.
Wake up by Integrated LAN/WLAN: Disabled
AC Recovery: Power Off
Deep Sleep Control: Enabled in S4 and S5 modes
Auto Power On: Disabled
Auto Power On Mode: Allows you to select the day (Default: disabled)
Auto Power On Date: Allows you to select the date
Auto Power On Time: Allows you to select the time
Allows you to enable to enable or disable the SMART feature.
Default: Disabled
Allows you to lock or unlock the system setup.
Default: Unlocked
Displays the status indicating if the Administrator password is
set.
Default: Not Set
Displays the status indicating if the System password is set.
Default: Not Set
Displays the status indicating if the System password is set.
Default: Not Set
Allows you to enter your service tag.
Allows you to create an admin password.
Allows you to create an HDD password.
Allows you to create a system password.
Allows you to set the option to change password.
Default: Permitted
Allows you to enable or disable the Firmware TPM.
23