Dell Dimension 5100C Panduan Servis - Halaman 38
Jelajahi secara online atau unduh pdf Panduan Servis untuk Desktop Dell Dimension 5100C. Dell Dimension 5100C 47 halaman. Dell desktop computer quick reference guide
Juga untuk Dell Dimension 5100C: Pengaturan (2 halaman)
Halaman Cetak
NOTE:
To boot to a USB device, the device must be bootable. To make sure your device is bootable, check the device documentation.
NOTE:
You can also change the boot sequence using the Boot Sequence options in the
Changing Boot Sequence for Future Boots
1. Enter
system
setup.
2. Press the arrow keys to highlight the Boot Sequence menu option and press <Enter> to access the menu.
NOTE:
Write down your current boot sequence in case you want to restore it.
3. Press the up- and down-arrow keys to move through the list of devices.
4. Press the spacebar to enable or disable a device (enabled devices have a checkmark).
5. Press the <u> key or the <d> key to move a selected device up or down the list.
Clearing Forgotten Passwords
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
1. Follow the procedures in
"Before You
2. To clear the password, remove the jumpers from pins 1 and 2.
3. Replace the computer cover.
4. Connect your computer and monitor to electrical outlets, and turn them on.
5. After the Microsoft® Windows® desktop appears on your computer, shut down the computer.
6. Turn off the monitor and disconnect it from the electrical outlet.
7. Disconnect the computer power cable from the electrical outlet, and press the power button to ground the system board.
8. Remove the computer cover.
9. Locate the 3-pin password jumper (PSWD) on the
10. Replace the computer cover.
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.
Begin."
system board
and attach the jumper to pins 1 and 2 to re-enable the password feature.
System Setup
Options.