Dell D560F Panduan Pemilik - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Server Dell D560F. Dell D560F 33 halaman. Emc vxrail appliances on poweredge servers

Halaman Cetak

Table 25. Temperature specifications (continued)

Temperature

(for altitude less than 950 m or 3117 ft)

Fresh air

Excursion temperature

Maximum temperature gradient (operating and

storage)

Table 26. Relative humidity specifications

Relative humidity

Storage

Operating

Table 27. Maximum vibration specifications

Maximum vibration

Operating

Storage

Table 28. Maximum shock specifications

Maximum shock

Operating

Storage

Table 29. Maximum altitude specifications

Maximum altitude

Operating

Storage

Standard operating temperature

Table 30. Standard operating temperature specifications

Standard operating temperature

Continuous operation

(for altitude less than 950 m or 3117 ft)

Specifications

For information about fresh air, see Expanded Operating Temperature

section.

55°C per Mil-Std 810G

NOTE:

Configuration restrictions will apply. For more information,

contact your Dell EMC sales support representative.

20°C/h (68°F/h)

Specifications

5% to 95% RH with 33°C (91°F) maximum dew point Atmosphere

must be noncondensing at all times.

5% to 85% relative humidity with 29°C (842°F) maximum dew point

Specifications

Random vibration per Mil-Std 810G method 514.6, 0.00220783

at 10 Hz to 500 Hz (overall 1.04

Mil-Std 810G Procedure I, Cat 4, Fig 514.6C-1 (US highway truck

vibration), 1 hour per axes

Specifications

Mil-Std 810G method 516.6, Proc I, 40G, 11 ms, 3 shocks in +/-

directions in 3 axes (total 18 shocks)

Mil-Std 810G method 516.6, Proc I, 40G, 11 ms, 3 shocks in +/-

directions in 3 axes (total 18 shocks)

Specifications

Mil-Std 810G method 500.5, Proc. II, air carriage, 15,000 ft for 1 hour

after stabilization

Mil-Std 810G method 500.5, Proc. I, 40,000 ft for 1 hour after

stabilization

Specifications

+5°C–45°C (41°F–113°F) with no direct sunlight on the equipment

NOTE:

The 150W CPU support is only up to 35°C.

), all 3 axes, 1 hour per axis

rms

Technical specifications

/Hz