Dell Dimension 2400 Series Manual - Halaman 27

Jelajahi secara online atau unduh pdf Manual untuk Server Dell Dimension 2400 Series. Dell Dimension 2400 Series 43 halaman. Vga card installation instructions
Juga untuk Dell Dimension 2400 Series: Panduan Pengaturan Cepat (2 halaman), Panduan Pengaturan Cepat (2 halaman), Panduan Instalasi (20 halaman), Instal Manual (8 halaman), Petunjuk Pemasangan Rak (32 halaman), Petunjuk Instalasi (1 halaman)

Halaman Cetak
Dell Dimension 2400 Series Manual
Back to Contents Page
 

Removing the Computer Cover

Dell™ Dimension™ 2400 Series  
 
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in your Owner's Manual or Product Information
Guide.
1.
 Shut down the computer
through the Start menu.
2.  Ensure that your computer and attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut
down your computer, turn them off now.
 
NOTICE:
To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack.
3.  Disconnect any telephone or telecommunication lines from the computer.
4.  Disconnect your computer and all attached devices from their electrical outlets, and then press the power button to ground the system board.
 
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
5.  Lay your computer on its side with the computer cover facing up.
6.  If your computer cover has a cover latch, slide and hold the cover latch.
7.  Grip the indents on the computer cover, and slide the computer cover toward the back of the computer.
 
8.  Place the computer cover on a level surface.
Back to Contents Page