Dell DR4000 Restore Manager Catatan Rilis - Halaman 4
Jelajahi secara online atau unduh pdf Catatan Rilis untuk Server Dell DR4000 Restore Manager. Dell DR4000 Restore Manager 16 halaman. Dell dr series system system interoperability guide release 2.0.0.0
Juga untuk Dell DR4000 Restore Manager: Panduan Pengenalan (6 halaman), Menyiapkan (1 halaman), Catatan Rilis (16 halaman), Manual (12 halaman)
Halaman Cetak
Known Issues and Resolutions
This section explains the known issues, descriptions, status, and any
workaround for the DR4000 system software.
Table 1. Known Best Practices Issues and Workarounds for Release 1.0
Issue
Description
4051
Data loss can occur when a
Recover,
DR4000 administrator does not
restore, and
disable the replication relationship
source-target
between the source and target
replication
containers before using the
issues.
DR4000 system command-line
interface (CLI) system --init
command on the source container.
CAUTION:
command reconfigures the DR4000
system and removes all existing
data, and recreates the file system
to factory settings. Dell does not
recommend using this command on
systems containing production data
because it destroys any existing
data.
6381
The DR4000 system experiences
Reduced
reduced savings rates (less than
savings issues
optimal) when the data it ingests is
encountered
already compression-enabled by
when
the native data source.
compression-
enabled data
is ingested
from DMA
data sources.
2
DR4000 System Release Notes, Release 1.0
The CLI system --init
Workaround/Solution
If you must use the CLI system --
init command, make sure that
you first disable the replication
relationship between the source
and target DR4000 systems.
CAUTION:
Failure to observe this
practice may corrupt the data that
is stored on the replication target
system.
It is recommended that you
disable the data compression
used by the data source for any
first-time backups. For optimal
savings, native data sources need
to send data in its raw state for
ingestion.