Dell DX6000 Panduan Pengguna - Halaman 35

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Server Dell DX6000. Dell DX6000 46 halaman. Rack installation instructions — static rails
Juga untuk Dell DX6000: Panduan Tambahan (4 halaman), Petunjuk Pemasangan Perangkat Keras (2 halaman), Panduan Penyiapan dan Konfigurasi (43 halaman), Panduan Instalasi dan Konfigurasi (35 halaman), Panduan Memulai (28 halaman), Pemberitahuan (28 halaman), Pemberitahuan (20 halaman), Ikhtisar (19 halaman), Panduan Konfigurasi (9 halaman), Panduan Konfigurasi (9 halaman), Catatan Rilis (8 halaman), Panduan Referensi (12 halaman), Panduan Konfigurasi (7 halaman), Catatan Rilis (6 halaman), Catatan Rilis (5 halaman), Catatan Rilis (5 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Instalasi (2 halaman)

Recovering the Operating System

Use the Unified Server Configurator - LifeCycle Controller Enabled (USC-

LCE) utility on the DX6a00 system to recover the operating system. For

specific instructions, see "Deploying the Operating System using the OS

Deployment Wizard" in the Dell Unified Server Configurator - LifeCycle

Enabled User Guide at support.dell.com/manuals.

CAUTION:

Reinstalling the operating system on existing disk drives erases all

installed applications and data.

Locate the operating system media that came with the system and proceed to

the operating system deployment option from USC-LCE. Follow the

instructions on the screen to install the operating system.

•

When prompted to enter an installation number, select Skip Entering

Installation Number option. The installation number can also be entered

at a later stage.

•

The DX Cluster Services Node software installation process requires a

YUM repository for updating package dependencies. Skip the installation

number entry to save time during the dependency update process.

•

To save time during the dependency update process, select Do Not

Connect when prompted to connect to the Red Hat Network. You may

connect to the Red Hat network once the DX Cluster Services Node

software installation is complete.

•

To configure the operating system partitions, see "Configuring the

Partitions During Operating System Recovery" on page 35.

Configuring the Partitions During Operating

System Recovery

To configure the required partitions:

1 On the Linux Partition Configuration screen, select the Review and

Modify Partitioning Layout option.

2 Click Next.

3 Click New.

4 In the Allowable Drives field, de-select the sdb volume.

Disaster Recovery