Dell E05B001 Panduan Referensi - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Referensi untuk Server Dell E05B001. Dell E05B001 29 halaman.

Halaman Cetak

Option

Description

Option

Family-Model-

Stepping

Brand

Level 2 Cache

Level 3 Cache

Number of Cores Specifies the number of cores per processor.

Maximum

Memory Capacity

Microcode

SATA Settings

You can use the SATA Settings screen to view the SATA settings of SATA devices and enable SATA and PCIe NVMe RAID

mode on your system.

View SATA Settings

To view the SATA Settings screen, perform the following steps:

Steps

1. Turn on, or restart your system.

2. Press F2 immediately after you see the following message:

F2 = System Setup

NOTE:

If your operating system begins to load before you press F2, wait for the system to finish booting, and then

restart your system and try again.

3. On the System Setup Main Menu screen, click System BIOS.

4. On the System BIOS screen, click SATA Settings.

SATA Settings details

About this task

The SATA Settings screen details are explained as follows:

Option

Description

Embedded SATA

Enables the embedded SATA option to be set to Off , AHCI, or RAID modes. This option is set to AHCI

Mode by default.

Security Freeze

Sends Security Freeze Lock command to the embedded SATA drives during POST. This option is

Lock

applicable only for AHCI mode. This option is set to Enabled by default.

Write Cache

Enables or disables the command for the embedded SATA drives during POST. This option is set to

Disabled by default.

Port n

Sets the drive type of the selected device.

For AHCI Mode or RAID Mode, BIOS support is always enabled.

BIOS and UEFI

Description

Specifies the family, model, and stepping of the processor as defined by Intel.

Specifies the brand name.

Specifies the total L2 cache.

Specifies the total L3 cache.

Specifies the maximum memory capacity per processor.

Specifies the microcode.