Dell E103S Panduan Instalasi dan Servis - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Instalasi dan Servis untuk Server Dell E103S. Dell E103S 34 halaman.

Dell E103S Panduan Instalasi dan Servis
Table 9. PowerEdge XR8610t externally accessible ports and connectors 
Connector
Description
● One Micro-USB connector for RS232 serial port.

PowerEdge XR8620t

Table 10. PowerEdge XR8620t externally accessible ports and connectors 
Ports and connectors
● One USB 3.0-compliant port on the front of the sled.
● One dedicated micro USB 2.0-compliant port for iDRAC Direct on the front of the sled.
● One RJ45 port for iDRAC remote management (dedicated port only) on the front of the sled.
● One RJ45 port for dry contact input connection.
● One Mini-DisplayPort on the front of the sled.
● Two (optional) 25 GbE SFP 28 embedded LAN on Motherboard (LOM) ports.
● One Micro-USB connector for RS232 serial port.

Environmental specifications

NOTE:
For additional information about environmental certifications, refer to the Product Environmental Datasheet located
with the Documentation on www.dell.com/support/home.
Table 11. Operating and non-operating temperature considerations 
Description
Operating temperature range for rear air-flow
(RAF) configuration
Ambient temperature for rear air-fllow (RAF)
Non-operating temperature range

Environmental Considerations

The PowerEdge XR8000r system is targeted for edge deployments and it meets all the additional standards for thermal, shock,
vibration parameters.
Table 12. Environmental considerations 
Industry
Telco
Safety
EMC
EMV
16
Technical specifications
Temperature range
-5 to <55°C with a startup temperature of 5°C
55°C
-40 to 85°C
Configuration
GR-1089-CORE
GR-63-CORE
SR-3580 (NEBS Level 3)
GR-3108-CORE (Class 1)
N/A
N/A
N/A
Description
Electromagnetic Compatibility and Electrical Safety
– Generic Criteria for Network Telecommunications
Equipment
NEBS Requirements: Physical Protection
NEBS Criteria Levels
Network Equipment in the Outside Plant (OSP). An
exception is made for cold boot at 0°C instead of
5°C in systems without heating enabled
LDV, IEC/EN, CFR, CSA
EN, CISPR, ES, DTAG, CFR, ICES, VCCI
RoHS, WEEE, EN, ECE