Dell EMC VxFlex Ready Node 14G Panduan Memulai Cepat - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Server Dell EMC VxFlex Ready Node 14G. Dell EMC VxFlex Ready Node 14G 22 halaman.
Juga untuk Dell EMC VxFlex Ready Node 14G: Panduan Inspeksi (8 halaman)
Halaman Cetak
CSV topology file for 2-layer deployment
Field
Domain
Username
Password
Operating System
SDS-SDC Only IPs
Is SDC
perfProfileForSDC
SDC Name
Monitoring the deployment
4. Upload the installation CSV file.
For more information, see the "Upload CSV file" section
5. In the Review Installation Configuration window, enter the required
passwords and other optional information.
6. Click Start Installation.
When deploying SDC nodes on a Linux or Windows server in a 2-layer environment,
add SDC rows to the CSV that only contain the values listed in this table.
Table 3 CSV topology spreadsheet-2-layer
Description
If using a domain user, the name of the domain (not relevant for Linux)
The name of the user. In Linux, this value is always root; in Windows, a user
with administrator rights (default: administrator).
Password used to log in to the node. In Linux, the root password. In Windows,
the password of a user with administrator rights.
The server's OS: linux or windows
SDS IP addresses to be used for communication among SDS and SDC nodes
only. Comma-separated, no spaces.
Note
For SDC-only nodes, enter the IP in this column.
Yes
Optional performance profile to set for SDCs. High or Default (same as
leaving this field empty).
Name for the SDC.
Monitor and advance the VxFlex OS deployment.
The deployment wizard performs the following phases: query, upload, install, and
configure. You must monitor and approve moving from one phase to the next.
Procedure
1. Click the Monitor tab.
The Install-query screen appears:
Deploying VxFlex OS in a 2-Layer Environment
CSV topology file for 2-layer deployment
Required
Yes
Yes
Yes
Yes
Yes
11