Dell EMC VxFlex Ready Node 14G Panduan Memulai Cepat - Halaman 20
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Server Dell EMC VxFlex Ready Node 14G. Dell EMC VxFlex Ready Node 14G 22 halaman.
Juga untuk Dell EMC VxFlex Ready Node 14G: Panduan Inspeksi (8 halaman)
Halaman Cetak
Quick Start Guide
Retrieving device paths in a Linux server with NVME devices configured
VxFlex Ready Node Quick Start Guide
20
Output similar to the following appears:
The output displays the device groups (DG) and their associated VD.
3. Match a VD to a device path:
a. Run the following command:
ls –l /dev/disk/by-path/
Output similar to the following appears:
b. In the command output, search for the line:
pci-0000:02:00.0-scsi-0:2:X:0
X is the number assigned to the VD.
where
c. In the line you just located, search for the sdX at the end of the line.
The device path for the VD is /dev/sdX.
Use this path when adding devices to a VxFlex OS SDS.
Retrieve the OS device paths in a Linux-based VxFlex Ready Node server with NVME
devices configured.
Before you begin
Ensure that you have root access to the server