DH Lifelabs Sciaire Storm HD110 Buku Petunjuk - Halaman 13

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pembersih Udara DH Lifelabs Sciaire Storm HD110. DH Lifelabs Sciaire Storm HD110 14 halaman.

Troubleshooting

!
Please disconnect the power supply immediately to avoid the danger of electric
shock before operation.
Malfunction
Common Cause
No electricity supply
Dirty infrared sensor cover
Device does not run
Installation errors
Element open circuit or
others
Short circuit
Device runs
continuously
Sensor faulty
Device sometimes
Internal components defect
runs
Device runs at low
Worn motor
speed
Sparks from device
Motor breakdown
Device cycles on and
Internal components defect
off
Motor defect
Abnormal noise from
the device
Fan cage is bent or damaged
21
Possible Solution
Check main supply / cables
Clean the infrared sensor cover
Check instruction manual for
possible power cable connection
mistakes
Contact the customer support
Contact the customer support
Contact the customer support
Contact the customer support
Contact the customer support
Contact the customer support
Contact the customer support
Contact the customer support
Contact the customer support
Product Warranty
This 3 year limited warranty applies to repair or replacement of product found to be defective in material
or workmanship. This warranty does not apply to damage resulting from commercial, abusive, unreason-
able use or supplemental damage. Defects that are the result of normal wear and tear will not be consid-
ered manufacturing defects under this warranty.
DH Lifelabs IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS
PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or
limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to
you. This warranty gives you specific legal rights, and you also may have other rights which vary from juris-
diction to jurisdiction. This warranty applies only to the original purchaser of this product from the original
date of purchase
At its option, DH Lifelabs will repair or replace this product if it is found to be defective in material or
workmanship. This warranty does not cover damage resulting from any unauthorized attempts to repair or
from any use not in accordance with the instruction manual. This warranty does not cover the filter except
for material or workmanship defects.

FCC Statement

Supplier's Declaration of Comformity:
Trade Name: DH Lifelabs
Models: HD100-120BL/HD110-240BL
Responsible Party: Dernier & Hamlyn Inc.
Address: Dernier & Hamlyn Inc., 720 Northgate Parkway, Wheeling, IL 60090
Telephone Number: 1-877-548-9722
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Copyright © 2023 Dernier & Hamlyn Inc. All rights reserved.
22