DH Lifelabs AquaSolvo AAHE-50WC04 Buku Petunjuk - Halaman 6
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Laboratorium DH Lifelabs AquaSolvo AAHE-50WC04. DH Lifelabs AquaSolvo AAHE-50WC04 10 halaman. Eco ambient air sterilizer
Juga untuk DH Lifelabs AquaSolvo AAHE-50WC04: Buku Petunjuk (10 halaman)
Halaman Cetak
Control Panel Continued
(SOLID)
Low Salt Alert
Solid salt level indicator
Sound alert
What to do:
1. Power off device
2. Fill water to MAX line
3. Add 1 scoop (1 gram) of
non-iodized salt and stir evenly
(SOLID)
Low Water Alert
Solid water level indicator
Sound alert
What to do:
1. Power off device
2. Empty HOCl Generator
3. Fill water to MAX line
4. Add 1 scoop (1 gram) of
non-iodized salt and stir evenly
Connectivity
Aaira + HEPA can connect with your smart device when you
download the DH Lifelabs App. Open the App and click '+'
to connect your device. Follow the steps in the App.
DH Lifelabs App
7
(FLASHING)
High Salt Alert
Flashing salt level indicator
Flashing blue light
Sound alert
What to do:
1. Power off device
2. Empty HOCl Generator
3. Rinse the CEF
4. Fill water to MAX line
5. Add 1 scoop (1 gram) of
non-iodized salt and stir evenly
(FLASHING)
HOCl Generator Alert
Flashing water level indicator
Sound alert
What to do:
1. Power off device
2. Remove HOCl Generator
and reposition correctly
in device
GET IT ON
GET IT ON
Cleaning Your Aaira + HEPA
The unit should be cleaned regularly. Clean the HOCl generator with fresh water.
Use a clean, dry cloth for the external surfaces of the machine. If water stays in
the HOCl Generator for 7 days, empty it and prepare a fresh salt water mixture to
continue operation. Clean CEF filter monthly by soaking in cool water for 1 hour.
Descaling
Lime scale builds up in the machine
over time. To ensure THE best
performance, descale monthly.
What to do:
1. Power off device
2. Empty HOCl generator
3. Take out the CEF
4. Add 200ml of 5% white
vinegar; leave for 1 hour
(do not turn device power on)
5. Empty and clean HOCl
generator with fresh water
Cleaning Air Quality Sensor
The inlet for the air quality sensor is located at the
back of the machine as shown. The inlet should be
cleaned every 2 months using a vacuum or with a
cotton swab that has been lightly moistened with
clean water.
Copyright © 2022 Dernier & Hamlyn Inc. All rights reserved.
Storage
If your machine will not be used
for 30 day follow directions
below.
What to do:
1. Power off device
2. Empty HOCl generator
3. Rinse the CEF and let dry
4. Store in a cool, dry locationn
AIR QUALITY SENSOR
8