Dell PowerEdge 2550 Panduan Aktivasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Aktivasi untuk Server Dell PowerEdge 2550. Dell PowerEdge 2550 32 halaman. Wake-on-lan (wol) support on dell servers
Juga untuk Dell PowerEdge 2550: Panduan Instalasi (26 halaman), Instal Manual (32 halaman), Panduan Konfigurasi (10 halaman), Petunjuk Pemasangan Rak (40 halaman), Panduan Instalasi (32 halaman), Manual (28 halaman), Manual (15 halaman)

Activating the Integrated RAID Controller

This document explains how to activate your Dell™ system's PowerEdge™ expandable

RAID controller 3/Di (PERC 3/Di). Your upgrade kit includes a RAID controller memory

module, RAID hardware key, RAID battery, and RAID software.

WARNING: Before you perform this procedure, you must turn off the system and

disconnect it from its electrical outlet. For more information, see "Safety

First—For You and Your Computer" in your system's Installation and

Troubleshooting Guide .

NOTICE: To avoid possible data loss, back up all data on the hard-disk drives before changing

the mode of operation of the integrated SCSI controller from SCSI to RAID.

CAUTION: See "Protecting Against Electrostatic Discharge" in the safety

instructions in your System Information document.

Open the system doors.

See "Opening the System Doors" in your system Installation and

Troubleshooting Guide.

Open the ejectors on the RAID controller memory module socket by pressing down

and outward, which allows you to insert the memory module into the socket.

See Figure 1-1 for the location of the socket on the system board.

A ct iv a ti n g th e De l l PE RC 3/D i

1-1