Dell PowerEdge 2650 Panduan Instalasi - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Server Dell PowerEdge 2650. Dell PowerEdge 2650 26 halaman. Activating the integrated raid controller
Juga untuk Dell PowerEdge 2650: Instal Manual (32 halaman), Pembaruan Informasi (14 halaman), Panduan Instalasi (20 halaman), Instal Manual (40 halaman), Manual Penggantian (28 halaman), Petunjuk Manual (8 halaman), Manual (42 halaman), Manual (15 halaman), Manual (42 halaman)

Dell PowerEdge 2650 Panduan Instalasi
support.dell.com

Installing the Rack Kit

NOTE: For instructions on installing the system itself, see "Installing the System in
the Rack" found later in this guide.
To install the rack kit in the rack, perform the following steps:
1.
Remove the rack's front and back doors.
2.
Install the slide assemblies in the rack.
The subsections that follow include instructions for performing these tasks.

Removing the Doors From a 24-U or 42-U Rack

You must remove the doors from the rack to provide access to the interior of the rack
and to prevent damage to the doors while installing the system.
This procedure provides instructions for removing doors from Dell 24-U and 42-U
racks. If you have a Dell PowerEdge 4210 rack, see the procedures contained in the
Dell PowerEdge 4210 Rack Installation Guide.
To remove the doors, perform the following steps.
CAUTION: To prevent personal injury due to the size and weight of the
doors, never attempt to remove the doors by yourself.
1.
Open the latch on the front door.
If you have a 24-U (1 U=1.75 inches) rack cabinet, unlock and twist the handle
clockwise and open the door (see Figure 1-2).
Rack Installation Guide
1-3