Dell PowerEdge 4200 Series Pemasangan Rak - Halaman 21
Jelajahi secara online atau unduh pdf Pemasangan Rak untuk Server Dell PowerEdge 4200 Series. Dell PowerEdge 4200 Series 34 halaman. Dell poweredge 4200 servers: installation guide
Juga untuk Dell PowerEdge 4200 Series: Panduan Instalasi (28 halaman), Pemasangan Rak (37 halaman)
Halaman Cetak
(Rev. 9/8/00) FILE LOCATION: S:\SYSTEMS\MARCONI\Rackingd\7U\05KCEa00\05KCEeb0.fm
support.dell.com
hinge insert
Figure 5. Removing the 24-U Rack Doors
CAUTION: Store the two doors where they will not injure someone if the
doors accidently fall over.
If you want to reverse the door so that the handle is on the other side, perform the fol-
lowing steps:
1.
With the door open, lift out and fully retract all hinge pins.
2.
Remove the hinges and door brackets from the door frame.
3.
Replace the hinges and door brackets on the opposite side and switch the posi-
tion of the handle.
4.
Replace the rack door (see the section, "Replacing the Rack Doors," found later
in this guide).
DELL CONFIDENTIAL - Preliminary
hinge pin
hinge
9/8/00
Rack Installation Guide
7