Dell POWEREDGE 4300 Panduan Instalasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Server Dell POWEREDGE 4300. Dell POWEREDGE 4300 28 halaman. System board upgrade
Juga untuk Dell POWEREDGE 4300: Informasi Instalasi (6 halaman), Pemasangan Rak (37 halaman), Panduan Instalasi Upgrade (14 halaman), Pemasangan Rak (34 halaman), Panduan Peningkatan (23 halaman), Panduan Peningkatan (24 halaman), Panduan Petunjuk Instalasi (12 halaman), Manual Penggantian (3 halaman), Informasi Instalasi (6 halaman), Panduan Instalasi (14 halaman)

Dell POWEREDGE 4300 Panduan Instalasi
1-2
Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide
8-32 x 0.5-inch hex-head,
thread-forming screws (4)

Figure 1-1. Tower Kit Contents

Before You Begin

Before you begin removing your system from the rack, carefully read the safety
precautions and tool requirements in the following sections.

Important Safety Information

Follow these safety precautions when removing your system from the rack.

Kit Restrictions

This tower kit is intended to be installed by trained service technicians.

Rack Stabilizer Feet

WARNING: Removing PowerEdge systems from a Dell rack without the
front and side stabilizer feet installed could cause the rack to tip over,
potentially resulting in bodily injury under certain circumstances.
Therefore, always install the stabilizer feet before removing components
from the rack.
rubber feet (4)
plastic filler plugs (18)