Dell PowerEdge 6400 Perakitan & Pemasangan - Halaman 7

Jelajahi secara online atau unduh pdf Perakitan & Pemasangan untuk Server Dell PowerEdge 6400. Dell PowerEdge 6400 32 halaman. Wake-on-lan (wol) support on dell servers
Juga untuk Dell PowerEdge 6400: Pemasangan Rak (37 halaman), Panduan Instalasi Upgrade (42 halaman), Pemasangan Rak (34 halaman), Panduan Instalasi (42 halaman), Panduan Instalasi (37 halaman), Manual (10 halaman), Instalasi (4 halaman), Manual (10 halaman), Manual (15 halaman)

support.dell.com

NOTE: If you cannot locate an unused connector on the DC power harness, discon-

nect the power cable from a peripheral device close to the fan assembly. Next,

connect the power cable to the fan assembly, and connect the remaining fan assem-

bly power connector to the peripheral device.

expansion-card

bracket

If you disconnected any interface cables between expansion card(s) and the SCSI

backplane board, connect the interface cables to the SCSI backplane board.

NOTE: Route interface cables from the expansion card(s) to the side of the

expansion-card cooling fan assembly (see Figure 1-2).

10. Examine all cable connections, especially those that might have come loose dur-

ing your work. Fold cables out of the way so that they do not catch on the system

cover.

11. Replace the system cover.

12. Reconnect the system and devices to their electrical outlets, and turn them on.

fan assembly

bracket

fan assembly

DC power connectors (2)

SCSI cable(s)

Installation Information

bracket

thumbscrew

cooling

fan assembly

1-3