Dell PowerEdge 6950 Panduan Petunjuk Instalasi - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Server Dell PowerEdge 6950. Dell PowerEdge 6950 21 halaman. Amd opteron 2000 and 8000 series processors installation
Juga untuk Dell PowerEdge 6950: Memulai (43 halaman), Pembaruan Informasi (7 halaman), Pembaruan Informasi (21 halaman)
Halaman Cetak
Figure 1. Installing the Processor
6
1
processor
4
socket
Applying Thermal Grease (If Required)
Thermal grease acts as a thermal conductor and fills the gaps between the heat sink and the processor.
If you do not receive a heat sink with pre-applied thermal grease with your processor kit, perform
the following procedure to apply thermal grease. See Figure 2.
CAUTION:
Avoid skin contact with the thermal grease. Do not ingest the grease.
NOTICE:
To avoid damaging components, keep the thermal grease away from electrical traces, pins, and leads.
NOTE:
See "Installing System Components" in your Hardware Owner's Manual for instructions on removing
and installing heat sinks and processors.
NOTE:
Ensure that you take all necessary precautions to prevent the CPU socket cover from popping off
the processor.
1 Remove the heat sink and the processor.
2 Using a clean, lint-free cloth, remove the existing thermal grease from the heat sink that you removed.
2
1
5
2
socket cover
(remove if present)
5
processor shield
4
3
socket-release lever
6
socket keys (2)
3