2Wire third-party wireless Ethernet adapters Panduan Konfigurasi - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Kartu Jaringan 2Wire third-party wireless Ethernet adapters. 2Wire third-party wireless Ethernet adapters 19 halaman. Wireless client

Halaman Cetak
Select the Configuration tab.
3.
In the Mode field, enter
4.
In the SSID field, enter the word "
5.
number. This is the Wireless Network Name. The Wireless Network Name is case-sensitive, so it is
important that you enter the word "
In the Tx Rate pulldown menu, verify that
6.
In the PS Mode pulldown menu, verify that
7.
Click
8.
Apply Changes
Select the Encryption tab.
9.
From the Encryption (WEP) pulldown menu, select
10.
In the WEP Key Entry field, select the
11.
In the Key 1 field, enter your ten-digit Wireless Encryption Key, located on the bottom of your
12.
HomePortal.
.
Infrastructure
" followed by the last three digits of your HomePortal serial
2WIRE
" in capital letters.
2WIRE
Fully Automatic
.
Manual Entry
is selected (this is the default).
is selected (this is the default).
Disabled
.
64 Bit
radio button.
10