Dell PowerEdge FD332 Panduan Pemilik - Halaman 31
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Server Dell PowerEdge FD332. Dell PowerEdge FD332 46 halaman.
Juga untuk Dell PowerEdge FD332: Memulai (2 halaman)
Halaman Cetak
Figure 27. Removing and installing a hard drive/SSD into the drive rails
1
drive rail
3
drive rail with release handle
Next step
Install the hard drive/SSD into the drive rails.
Related links
Installing a hard drive/SSD into the drive rails
Opening the drive drawer
Closing the drive drawer
Removing a hard drive/SSD assembly
Installing a hard drive/SSD into the drive rails
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION:
Do not keep the drive drawer open for more than three minutes.
NOTE:
This is a field replaceable unit (FRU). Removal and installation procedures must be performed only by Dell certified
service technicians.
NOTE:
You must remove a hard drive/SSD from the drive rails if you are replacing the hard drive/SSD with a new drive.
1
Ensure that you read the
2
Keep the #1 Phillips screwdriver ready.
3
Remove the hard drive/SSD from the drive rails.
Steps
1
Lay the hard drive/SSD on a flat surface with the connector side of the drive facing down.
2
Align the screw holes on the drive rails with the screw holes on the hard drive/SSD.
Safety
instructions.
2
hard drive/SSD
4
screw (4)
Installing and removing storage sled components
31