Dell PowerEdge FX2 Panduan Konfigurasi - Halaman 20
Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Server Dell PowerEdge FX2. Dell PowerEdge FX2 24 halaman. Upgrading from 10gbe pass-through modules to fn410s i/o modules
Juga untuk Dell PowerEdge FX2: Memulai (2 halaman), Memulai dengan Sistem Anda (2 halaman)
Halaman Cetak
D.2
Half-width servers with dual-port CNAs
The PowerEdge FC630 is an example of a half-width server. For half-width servers with dual-port CNAs
installed, the CNA ports map to a single port on each of the two FN IOMs. Figure 12 and Table 2 present the
port mapping for half-width servers with dual-port CNAs.
Note: Ports 2, 4, 6 and 8 are not used when using half-width blades with dual-port adapters.
Half-width servers with dual-port CNAs
Server Slot
1
2
3
4
20
PowerEdge FX2 - Upgrading from 10GbE Pass-through Modules to FN410S I/O Modules | version 1.0
Slot 1
Slot 3
FN IOM A1 (Top)
Internal Ports
1
2
3
5
6
7
Half-width servers with dual-port CNAs
FN IOM A1 (Top)
Internal Port Numbers
1
3
5
7
4
FN IOM A2 (Bottom)
8
Internal Ports
1
2
5
6
FN IOM A2 (Bottom)
Internal Port Numbers
1
3
5
7
Slot 2
Slot 4
3
4
7
8