DH Lifelabs H100-240GR Buku Petunjuk - Halaman 2

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Rumput dan Taman DH Lifelabs H100-240GR. DH Lifelabs H100-240GR 4 halaman.
Juga untuk DH Lifelabs H100-240GR: Buku Petunjuk (4 halaman)

Halaman Cetak

Your safety is important to us.

Read all safety instructions before you

use the device.

WARNING! TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK OR INJURY PLEASE

ADHERE TO THE FOLLOWING:

DO NOT connect to power before

installation is complete.

Always disconnect power to the

ionizer before handling.

All field wiring needs to be

in accordance with NEC and

Authorities Having Jurisdiction

(AHJ).

It is recommended that surge

protection be installed with this

ionizer at the equipment level,

building level, or circuit breaker

panel feeding the product.

If a step-down transformer is used

to feed the ionizer, the transformer

must be grounded.

Do not install the ionizer on the

same circuit as a UV Lamp or

connect to the same transformer

as a UV Lamp.

Connect power to the ionizer

using appropriate voltage.

The installer shall provide a power

source that is properly grounded

per the local AHJ.

For best results interlock ionizer

with fan power.

Apply power to unit. Confirm that

green indicator light illuminates

showing that the ionizer is on and

functioning properly.

RISK OF ELECTRIC SHOCK

These servicing instructions are for

use by qualified personnel only. To

reduce the risk of electric shock,

do not perform any servicing

other than that contained in the

operating instructions unless you

are qualified to do so.

Read all safety

instructions in the

instruction manual,

and on device.

Product Description

Sciaire Pro H100 is a carbon fiber brush output ionizer

producing positive and negative ions. This ionization equipment

is effective in reducing harmful pathogens, pollutants, and

odors by introducing positive and negative ions into the system

airflow. Sciaire Pro H100 is self-contained in a potted enclosure

which has molded flanges with mounting holes. These models

are able to accept 12-24V DC/AC without the use of an external

power supply.

Product Overview

Plasma Generator

ST4.2 Screw (x2)