Dell PowerEdge M420 Panduan Pengguna - Halaman 22

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Server Dell PowerEdge M420. Dell PowerEdge M420 26 halaman. Dell poweredge blade servers getting started guide
Juga untuk Dell PowerEdge M420: Pembaruan Informasi (38 halaman), Catatan Rilis (27 halaman), Manual (25 halaman), Panduan Pengguna (23 halaman), Panduan Informasi Penting (35 halaman), Manual Pembaruan (32 halaman), Manual Pembaruan (28 halaman), Panduan Pengguna (22 halaman), Panduan Memulai (12 halaman), Manual (38 halaman), Panduan Teknis (46 halaman), Panduan Teknis (48 halaman), Panduan Portofolio (27 halaman), Panduan Memulai (14 halaman), Panduan Memulai (12 halaman)

Rev 1.00

The system is now waiting for the file to be transferred from the SSH client.

Step 5. In your SSH client, initiate file transfer by clicking Transfers and then providing the path

to the SW binary file.

Step 6. Exit the bootload. Run: "exit"

Step 7. Power cycle to allow for the SW to take effect. From the CMC CLI, type the following

command:

$ racadm chassisaction -m switch-<n> powercycle

Where n is the number of the switch, 2 in our example.

Step 8. Wait at least 20 seconds to allow for the boot loader to load.

Figure 14: Bootloader

Figure 15: Transfer File

Software User's Manual