Dell PowerEdge M910 Panduan Teknis - Halaman 32

Jelajahi secara online atau unduh pdf Panduan Teknis untuk Server Dell PowerEdge M910. Dell PowerEdge M910 45 halaman. M-series blade servers
Juga untuk Dell PowerEdge M910: Manual Pembaruan (44 halaman), Manual Pembaruan (21 halaman), Manual Pembaruan (14 halaman), Panduan Instalasi (7 halaman), Manual Pembaruan (28 halaman), Panduan Memulai (12 halaman), Panduan Memulai (12 halaman), Panduan Teknis (46 halaman), Panduan Portofolio (27 halaman), Panduan Memulai (14 halaman), Panduan Memulai (12 halaman), Panduan Teknis (49 halaman)

PERC H200

The PERC H200 Modular card is an expansion controller that incorporates two four-channel 6Gbps

SAS IOCs for connection to SAS hard disk drives. It is designed in a form factor that allows the same

card to be used in other 11G blade-server platforms.

PERC H700

The M915 also supports the PERC H700 Modular storage controller card with battery-backed cache.

The PERC H700 card has its own processor with a PCIe 2.0 host interface and DDR2 memory.

SATA repeater

The M910 does not support the SATA repeater. The only SATA drives supported by M910 are the SSD

drives, which are only supported off the PERC solution.

PERC 6/i

For customers who want a hardware RAID solution, the PERC 6/i is available as an optional

customer kit. The PERC 6/i uses the LSI 1078 ROC (RAID on Chip) processor with a PCIe host

interface and DDR2 memory. A battery is available with this card.

Optical drives

Optical drives are optional in all M910 systems and connect to the blade via the front USB interface.

The following internal slim-line drives are available on the M910:



DVD-ROM



DVD+RW

PATA (IDE) optical drives are not supported.

PowerEdge M910 Technical Guide