DH Lifelabs Sciaire Pro H110 Buku Petunjuk - Halaman 3

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pengionisasi Udara DH Lifelabs Sciaire Pro H110. DH Lifelabs Sciaire Pro H110 6 halaman.

Product Description

Sciaire Pro H100/H110 is a carbon fiber brush output

air ion generator producing positive and negative

ions. Sciaire Pro H100/H110 is self-contained in a

potted enclosure which has molded flanges with

mounting holes. These models are able to accept

12-24V DC/AC or 100-240V AC without the use of an

external power supply.

Air Ion Generator

ST4.2 Screw (x2)

ATTACHED MAGNET

Sciaire Pro H100:

Black-red wires

Sciaire Pro H110:

Black-white wires

WARNING: DO NOT CONNECT TO POWER

BEFORE MECHANICAL INSTALLATION

IS COMPLETE. ALWAYS DISCONNECT

POWER BEFORE HANDLING.

1. Mount Sciaire Pro H100/H110 in a location with

general maintenance access. Ensure the brush tips

are not within ¾" of any metallic surface to prevent

arcing.

2. Mount the air ion generator at or near the fan inlet

using the holes in the mounting flanges, ensuring

that the air stream flows over the 2 brush tips

simultaneously. See graphic overleaf for reference.

3. The device should be mounted downstream of the

filter.

4. Avoid locations directly after a cooling coil or

humidifier.

5. Exit ducts are recommended to install a group of

air ion generators every 787 inches (20 meters) to

ensure ion concentration .

6. Add a group of air ion generators in the middle near

the outlet with 39-79 inches (1-2 meters) distance to

ensure the concentration of ions in the room.