Dell PowerEdge Rack Enclosure 4020S Manual - Halaman 11

Jelajahi secara online atau unduh pdf Manual untuk Server Dell PowerEdge Rack Enclosure 4020S. Dell PowerEdge Rack Enclosure 4020S 12 halaman. Cabling poweredge t610
Juga untuk Dell PowerEdge Rack Enclosure 4020S: Manual (20 halaman), Manual (20 halaman), Manual (17 halaman), Manual (12 halaman), Manual (10 halaman), Manual (10 halaman), Manual (9 halaman), Manual (9 halaman), Manual (10 halaman), Manual (12 halaman), Manual (11 halaman), Manual (8 halaman)

Halaman Cetak
Dell PowerEdge Rack Enclosure 4020S Manual
Cable Routing Procedures for Dell™ PowerEdge™ R415 Systems

Figure 10: Disconnecting the Inner CMA Attachment Bracket

Figure 11: Replacing the Outer Power Supply

Section 4: Cabling a PowerEdge™ R415 System Installed in Static Rails
NOTE: The CMA is compatible with the sliding rails only, not the static rails.
1.
Follow the instructions contained in the
to install the server into a two-post or four-post rack.
2. Install the hook and loop straps provided in the rail kit through the slots in the rear brackets of
the rails as described in the
3. Connect all applicable cables to the rear of the system and verify that all connections are
secure.
Rack Installation Instructions
Rack Installation Instructions
Disconnected inner
CMA bracket
found in the static rail kit
.
Page 9