EARTHBOARD EBII-SR Menyiapkan - Halaman 2

Jelajahi secara online atau unduh pdf Menyiapkan untuk Pedal Musik EARTHBOARD EBII-SR. EARTHBOARD EBII-SR 2 halaman.

For battery power, 1 or 2 Battery Tethers plug

into the Battery Port(s). 2 Battery Tethers are used with the

Power Pack XL,

available when purchasing your EARTHBOARD

or via our accessory option. The Power Pack XL provides higher

power capacity to the EARTHBOARD.

Plug in an AC Adapter to either Power Port on the right side. Power

can also be used to power a floor pedal (as shown) or to connect

power to another EARTHBOARD.

Wide pedal using

A Dummy Boot & an ISO Boot for

isolation.

Gravity Boot.

Each effects pedal sits on a

and attach to the steel rails of the EBII-SR. (Ensure the

with the

red dot

on the left.) The

the Gravity Boot to the pedal for power.

For wide pedals that need more support, you can use a

Boot

is exactly like a Gravity Boot, except it has no power circuit. If you have an extra

Gravity Boot, you can use that as well. These are available for purchase as an

accessory.

Typical setup for the EBII-SR

(Note, battery and adapter would not be plugged in at the same time.)

The Gravity boot has magnetic feet

RED

feet are on the rail

Gravity Boot Tether

is the cable that connects

Dummy Boot.

The 2 Power Ports on the right side have 3 possible functions:

1. Plug in an AC adapter when not using a battery.

2. Use our LifeLine cable (supplied) to power a floor pedal.

3. Use our LifeLine cable to connect to another EARTHBOARD.

NEED PATCH CABLES?

Dummy

The

We have high quality molded cables with 90-degree ¼"

Jacks. A superb value compared to other retailers.

Use code 'freebie10' get 10% off your first 4-pack.

We have 4",6", and 8" cables available.

TO PEDAL

WE HAVE THEM FOR YOU!