Dell PowerEdge systems 6300 Informasi Instalasi - Halaman 4

Jelajahi secara online atau unduh pdf Informasi Instalasi untuk Server Dell PowerEdge systems 6300. Dell PowerEdge systems 6300 6 halaman. Systems 1 x 2 backplane
Juga untuk Dell PowerEdge systems 6300: Informasi Instalasi (6 halaman), Panduan Instalasi (28 halaman), Pemasangan Rak (37 halaman), Panduan Pengguna (42 halaman), Instal Manual (8 halaman), Pemasangan Rak (34 halaman), Panduan Petunjuk Instalasi (12 halaman), Manual Penggantian (3 halaman)

Halaman Cetak
Dell PowerEdge systems 6300 Informasi Instalasi
2.
3.
4.
5.
6.
power connector
hard-disk drive
SCSI backplane
2
I
C cable
)LJXUH,QVWDOOLQJWKH,
4
Dell PowerEdge 6300 and 4300 Systems 1 x 2 Backplane Installation Information
All manuals and user guides at all-guides.com
In the customer kit, locate the I
connectors: a 20-pin connector on one end and in the middle and a 10-pin
connector on the other end.)
Attach the 10-pin connector on the I
the 1 x 2 backplane.
Attach the 20-pin connector on the I
on the system board.
Attach the loose end of the I
2
tor of the I
C extension cable.
Attach a four-wire power cable to the power connector on the 1 x 2 backplane.
NOTE: The four-wire power cable is the standard cable found on all systems and
provides power to peripherals; for example, for a CD-ROM drive or tape drive.
2
C extension cable. (This cable has three
2
C extension cable to the 10-pin connector on
2
C extension cable to the 20-pin connector
2
C cable, which was set aside, to the middle connec-
10-pin connector on
1 x 2 backplane
2
I
C extension cable
&([WHQVLRQ&DEOH
20-pin connector
on system board