Avue AU-G50IR-WB26 Panduan Pengoperasian - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Kamera Keamanan Avue AU-G50IR-WB26. Avue AU-G50IR-WB26 17 halaman. High-speed outdoor ptz camera series

OSD
Function Setting
FUNCTION SETTING
--------------------------------
PRESET

SCAN

PATTERNS

TOUR

ZONES

TIME RUNNING

BACK
EXIT
Function Setting
PRESET
---------------------------------
PRESET NUMBER
XX
SET PRESET
SHOW PRESET
CLEAR PRESET
EDIT PRESET LABEL
BACK
Function Setting
SCAN
----------------------------------------
SCAN SPEED
50
SET LEFT LIMIT
SET RIGHT LIMIT
RUN SCAN
CLEAR SCAN
EDIT SCAN LABEL
BACK
EXIT
Function Setting
PATTERNS
PATTERN NUMBER
XX
PROGRAM PATTERN
RUN PATTERN
CLEAR PATTERN
EDIT PATTERN LABEL
BACK
EXIT
Function Setting
TOUR
---------------------------------------
TOUR NUMBER
1
EDIT TOUR
RUN TOUR
CLEAR TOUR
BACK
EXIT
Function Setting
EDIT TOUR
---------------------------------------
P0-S-TM P0-S-TM P0-S-TM
٠٠-٠- ٠٠ ٠٠-٠- ٠٠ ٠٠-٠
- 00
٠٠-٠- ٠٠ ٠٠-٠- ٠٠ ٠٠-٠
- 00
٠٠-٠- ٠٠ ٠٠-٠- ٠٠ ٠٠-٠
- 00
٠٠-٠- ٠٠ ٠٠-٠- ٠٠ ٠٠-٠
- 00
٠٠-٠- ٠٠ ٠٠-٠- ٠٠ ٠٠-٠
- 00
٠٠-٠- ٠٠ ٠٠-٠- ٠٠ ٠٠-٠
- 00
٠٠-٠- ٠٠ ٠٠-٠- ٠٠ ٠٠-٠
- 00
٠٠-٠- ٠٠ ٠٠-٠- ٠٠ ٠٠-٠
- 00
BACK
EXIT
Function Setting
ZONE
--------------------------------
ZONE NUMBER
1
SET LEFT LIMIT
SET RIGHT LIMIT
CLEAR ZONE
EDIT ZONE LABEL
BACK
EXIT
PRESET:
Setup and manage the presents.
SCAN:
Define and manage the scan tours.
PATTERNS:
Pattern tours.
TOUR:
Preset Tours
ZONES:
Zone settings
TIME RUNNING:
Scheduled actions
Presets
PRESET NUMBER:
Selected preset position, supports up to 128 presets.
SET PRESET:
Setup the preset position. Enter this menu, move the PTZ to desired positon and press [IRIS
OPEN] to store, or [IRIS CLOSE] to discard.
SHOW PRESET:
Recall the preset position
CLEAR PRESET:
Delete the preset position
EDIT PRESET LABEL
: Assign the preset label.
Scan
SCAN SPEED:
Define the scan speed, lowest 1 - fastest 50
SET LEFT LIMIT:
Define the left point of scan tour, press [IRIS OPEN] to store, or [IRIS CLOSE] to discard.
SET RIGHT LIMIT:
Define the right point of scan tour, press [IRIS OPEN] to store, or [IRIS CLOSE] to
discard.
RUN SCAN:
Start the scan tour
CLEAR SCAN:
Erase the stored scan tour
EDIT SCAN LABEL:
Assign a name of the tour

Pattern

The Pattern-Tour is a custom-defined tour by recording user's control action up to 180 sec per tour. This dome can
support up to 4 pattern tours.
PATTERN NUMBER:
Selected pattern tour
PROGRAM PATTERN:
Record the tour. Enter this menu and start the tour recording, when finished,
Press[IRIS OPEN] to store.
RUN PATTERN:
Start the selected pattern tour
CLEAR PATTERN:
Delete the selected pattern
EDIT PATTERN LABEL:
Tour
A tour is a automated cruising through selected preset positions with individual speed and dwell time. This PTZ supports up
to 4 tours with 24 position each.
TOUR NUMBER:
Currently selected tour
EDIT TOUR:
Edit the selected tour
RUN TOUR:
Start the selected tour
CLEAR TOUR:
Delete the selected tour
Tour
Edit Tour
PO
: The preset position being included in the tour. If there is no preset position stored,please define the
preset at first.
S:
The velocity when PTZ moves to this preset, between low1 - high 8.
TM:
The dwell before the PTZ moves to next point. between 1-60 second
Zones
The ZONE function allows user to define a perimeter with a name tag. The perimeter is defined by given a left- and right-end
of the PTZ range. When the camera enters this area, the name will be displayed on the screen, which provides better
orientation in surveillance application. Up to 8 zones are supported.
ZONE NUMBER:
Currently selected zone
SET LEFT LIMIT:
Set the left-end, press [IRIS OPEN] to store, or [IRIS CLOSE] to discard.
SET RIGHT LIMIT:
Set the right-end, press [IRIS OPEN] to store, or [IRIS CLOSE] to discard.
CLEAR ZONE:
Delete the zone setting
EDIT ZONE LABEL:
Edit the name tag
Assign the name of the pattern
English
7