Dell PowerVault MD3200i Series Panduan Pengguna - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Server Dell PowerVault MD3200i Series. Dell PowerVault MD3200i Series 46 halaman. Storage arrays
Juga untuk Dell PowerVault MD3200i Series: Panduan Penyebaran (41 halaman), Manual Pembaruan (32 halaman), Petunjuk Pemasangan Rak (2 halaman), Matriks Dukungan (12 halaman), Panduan Instalasi (18 halaman), Pembaruan Informasi (1 halaman), Matriks Dukungan (11 halaman), Matriks Dukungan (17 halaman), Buku Panduan Teknis (38 halaman), Buku Putih (22 halaman), Manual (16 halaman)

Figure 12. Port Binding Separate vSwitches

After you map VMkernel ports to network adapters, use the esxcli command

to connect the ports with the software iSCSI initiator.

Activate Multipathing for Software iSCSI Initiator

Use this task only if your ESX/ESXi host has two or more physical network

adapters that you designate for iSCSI traffic. This task explains how to

activate host-based multipathing for your host by connecting the software

iSCSI initiator to iSCSI VMkernel ports that you created for the network

adapters.

Before you activate multipathing, complete the following tasks:

•

Create VMkernel ports for the physical network adapters making sure to

use 1:1 port to adapter mapping.

•

Enable the software iSCSI initiator.

To activate multipathing for software iSCSI initiator:

1 Identify the names of VMkernel iSCSI ports assigned to physical adapters.

The vSphere Client displays the port's name below the network label.

Example 1: Figure 13 shows the ports' names as vmk1 and vmk2.

Dell MD Storage Array vCenter Plug-in