Dell PowerVault NX1950 Panduan Instalasi dan Pemecahan Masalah - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pemecahan Masalah untuk Server Dell PowerVault NX1950. Dell PowerVault NX1950 48 halaman. For vmware esx server software
Juga untuk Dell PowerVault NX1950: Panduan Penyebaran (34 halaman), Panduan Informasi Penting (26 halaman), Memulai (49 halaman), Panduan Penyebaran (38 halaman), Panduan Peningkatan (18 halaman), Panduan Referensi (4 halaman), Menyiapkan (2 halaman), Menggunakan (2 halaman), Panduan Konfigurasi (11 halaman)

Cabling Your Integrated Solution

Figure 2-2 shows the supported cable configuration for the

PowerVault NX1950 cluster solution.

You must connect the SAS 5/E Adapters on both the PowerVault NX1950

storage systems to the PowerVault MD3000 storage array to enable the

storage systems as cluster nodes. For your Ethernet port connection, It

is recommended that you use the on-board connections for the public

network. These on-board NIC connections support TCP/IP Offload Engine

(TOE). If available, dedicate one optional NIC port for the MSCS heartbeat

connection; otherwise you must dedicate one on-board connection for the

MSCS heartbeat.

Figure 2-2. Example of Cabling a PowerVault NX1950 Integrated Cluster Solution

Setting Up Your Cluster

controller 0

PowerVault NX1950 storage system 0

PowerVault NX1950 storage system 1

PowerVault MD3000 storage array

controller 1