Dell VEP4600 Panduan Instalasi - Halaman 28
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Server Dell VEP4600. Dell VEP4600 40 halaman.
Juga untuk Dell VEP4600: Setup Manual (23 halaman), Panduan Instalasi (40 halaman)
Halaman Cetak
Besides the 10/100/1000Base-T RJ-45 ports, the VEP4600 provides several ports for management and storage.
NOTE:
The output examples in this section are for reference only. Your output may vary.
Topics:
•
RS-232 console port access
•
MicroUSB-B console port access
RS-232 console port access
The RS-232 console port is on the I/O-side of the VEP4600.
Figure 17. VEP4600 RS-232 console and management ports
1. RS-232: processor console port (left); BMC console port (right)
CAUTION:
Ensure that any equipment attached to the serial port can support the required 115200 baud rate.
NOTE:
Before starting this procedure, ensure that your PC has a 9-pin serial port and that you have installed a terminal
emulation program on the PC.
NOTE:
If your PC's serial port cannot accept a female DB-9 connector, use a DB-9 male-to-male adaptor.
1. Install the provided RJ-45 connector-side of the provided cable into the platform console port.
2. Install the DB-9 female-side of the provided copper cable into your PC's serial port. Or install the DB-9 cable into other data terminal
equipment (DTE) server hardware.
3. Keep the default terminal settings on the console as follows:
•
115200 baud rate
•
No parity
•
8 data bits
•
1 stop bit
•
No flow control
MicroUSB-B console port access
The MicroUSB-B console port is on the PSU side of the VEP4600.
The terminal settings are the same for the serial console port and the RS-232/RJ-45 console port:
28
Management ports
Management ports
7