Dell VxRail G560 Panduan Pemilik - Halaman 31

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Server Dell VxRail G560. Dell VxRail G560 32 halaman.
Juga untuk Dell VxRail G560: Panduan Pemilik (33 halaman)

Halaman Cetak
Dell VxRail G560 Panduan Pemilik
● Up to two RDIMMs can be populated per channel.
● Up to two LRDIMMs can be populated per channel.
● If memory modules with different speeds are installed, they will operate at the speed of the slowest installed memory
module(s) or slower depending on appliance DIMM configuration.
● Populate memory module sockets only if a processor is installed. For single-processor VxRail, sockets A1 to A12 are available.
For dual-processor VxRail, sockets A1 to A12 and sockets B1 to B12 are available.
● Populate all the sockets with white release tabs first, and then followed by the black release tabs.
● In a dual-processor configuration, the memory configuration for each processor should be identical. For example, if you
populate socket A1 for processor 1, then populate socket B1 for processor 2, and so on.

Expansion cards

The expansion card in the system is a printed circuit board that can be inserted into an expansion slot on the system board riser
card to add functionality to the system through the expansion bus.
NOTE:
A missing or an unsupported expansion card riser logs an System Event Log (SEL) event. This does not prevent
your system from powering on and no BIOS, POST messages or F1 or F2 pause is displayed.

PCIe slot priority

Table 26. Supported expansion options
Riser
PCIe Slot (slot 4)
Mezzanine slot (slot 1) Mezzanine
Open Computing
Project (OCP)
mezzanine slot (slot 3)
Riser slot (SATA M.2)
(slot 5)
NOTE:
For the expansion bus specification see
Table 27. Supported expansion cards
Location
Card type
OCP (slot 3)
Intel CNA X710 -
Dual Port Adapter
Mezzanine (slot 1)
Dell HBA H330 mini
Adapter
Slot 5
SATA M.2
Slot 4
Intel Ethernet CNA
XL710-Q2 Adapter
Slot 4
Intel Ethernet 10G
Dual Port X550-t
Adapter
Form factor
Slot
Low profile
4
1
Mezzanine
3
Low profile
5
Form factor
Mezzanine
Mezzanine
Low profile
Low profile
Low profile
CPU mapping
CPU1
CPU1
CPU1
CPU2
Expansion bus
specifications.
Link width
x8
x8
x16
x8
x4
Slot width
Maximum power
consumption
PCIe Gen3 x16 (x16
75 W
connector)
PCIe Gen3 x8
25 W
(through Bridge
Board)
PCIe Gen3 x16
25 W
25 W
PCIe connector data
lanes not used for
M.2 SATA Riser
Slot priority
Maximum number
of cards
3
1
1
1
4
1
4
1
4
1
Replacing and adding hardware
31