Dell VxRail G560F Panduan Pemilik - Halaman 30
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Server Dell VxRail G560F. Dell VxRail G560F 33 halaman.
Juga untuk Dell VxRail G560F: Panduan Pemilik (32 halaman)
Halaman Cetak
Hardware Components
M.2 SATA disk
Intel Ethernet X710 OCP server
adapter
System memory
The system supports DDR4 registered DIMMs (RDIMMs) and load reduced DIMMs (LRDIMMs). System memory holds the instructions
that are executed by the processor.
NOTE:
MT/s indicates DIMM speed in MegaTransfers per second.
Memory bus operating frequency can be 2666 MT/s, 2400 MT/s, or 2133 MT/s depending on the following factors:
•
DIMM type (RDIMM or LRDIMM)
•
Number of DIMMs populated per channel
•
System profile selected (for example, Performance Optimized, or Custom [can be run at high speed or lower])
•
Maximum supported DIMM frequency of the processors
Your system contains 16 memory sockets split into two sets of 8 sockets, one set per processor. Each 8-socket set is organized into
channels. In each channel, the release tabs of the first socket are marked white, the second socket black.
Figure 12. Memory socket locations
Memory channels are organized as follows:
Table 26. Memory channels
Processor
Channel 0
Processor 1
Slots A1 and A7
Processor 2
Slots B1 and B7
General memory module installation guidelines
NOTE:
Memory configurations that fail to observe these guidelines can prevent your appliance from booting, stop responding
during memory configuration, or operating with reduced memory.
The following are the recommended guidelines for installing memory modules:
•
RDIMMs and LRDIMMs must not be mixed.
30
Replacing and adding hardware
Customer Replaceable Unit (CRU)
No
No
Channel 1
Channel 2
Slots A2
Slots A3
Slots B2
Slots B3
Field Replaceable Unit (FRU)
Channel 3
Channel 4
Slots A8 and A4
Slots A5
Slots B8 and B4
Slots B5
Yes
Yes
Channel 5
Slots A6
Slots B6