Dell Wyse 1010 Zero Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Server Dell Wyse 1010 Zero. Dell Wyse 1010 Zero 7 halaman.

Setting Up Your Zero Client

Make sure that you have read Safety Guidelines before setting up and operating this product. Refer to the

figures and proceed as follows:

Install Windows MultiPoint Server on the Server:

Install according to the Microsoft installation documentation at

www.microsoft.com/windows/mulitpoint/default.aspx

Important:

Wyse 1010 zero clients can be installed on Microsoft Windows MultiPoint Server 2012 (Standard or

Premium). For more information, locate your product and download the Fact Sheet using the Cloud

clients tab at

www.dellwyse.com/products

Update to the Latest Audio, Ethernet, and Video Drivers on the Server:

Update according to the Microsoft installation documentation.

CAUTION: After install ing MultiPoint Server and updating the drivers, ensure that all devices

(includ ing all graphics cards) are properly recognized by the server; otherwise, MultiPoint

Server will not recognize Wyse E class clients.

Install the E Class Zero Client Driver on the Server:

Wyse E class driver software can be found at

Connect the Wyse Zero Client to the Server:

Place the zero client on a desk; or use the desktop stand/bracket for VESA mounting (assemble with

provided screws). Connect according to your network architecture as defined by your network

administrator/consultant. For example, Connect one end of the provided Ethernet cable to the zero

client Network port, and then connect the other end of the Ethernet cable to an Ethernet switch that

is connected to the server.

NOTE: Position 1010 to within 300 feet of the Ethernet switch.

CAUTION: You cannot mix Wyse 1010 with 7030 zero clients. They all need to be either USB-

connected zero clients or Ethernet connected zero clients

Attach Peripherals to the Wyse Zero Cl ient:

Attach all peripherals of each user station such as monitor, keyboard, mouse, printer, and audio

devices to the respective ports. VGA video port, USB 2.0 ports, microphone in, and audio out

connections on the zero client are available.

WARNING:

Connect the Wyse Zero Client Power Cable and Adapter:

Connect the AC power cable to the zero client power cable input, and then connect the 5V DC

power adapter to a 100-240V AC, 50- 60 Hz electrical outlet.

NOTE: After connection, it takes a few minutes for the MultiPoint Manager to launch on the

server. If no launch occurs, go to Start > All Programs, and click MultiPoint Manager window.

Configure the Zero Client on Windows MultiPoint Server:

dellwyse.com/downloads