Dell 1707FPV - UltraSharp - 17" LCD Monitor Panduan Pengguna - Halaman 26

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Dell 1707FPV - UltraSharp - 17" LCD Monitor. Dell 1707FPV - UltraSharp - 17" LCD Monitor 48 halaman. Flat panel monitor
Juga untuk Dell 1707FPV - UltraSharp - 17" LCD Monitor: Setup Manual (2 halaman)

Halaman Cetak

Solving Problems: Dell™ 1907FPV Flat Panel Monitor User's Guide

Back to Contents Page

Solving Problems

Dell™ 1907FPV Flat Panel Monitor User's Guide

Troubleshooting Your Monitor

General Problems

Product Specific Problems

USB Problems

Troubleshooting Your Soundbar

CAUTION: Before you begin any of the procedures in this section, follow the

Troubleshooting Your Monitor

Self-Test Feature Check (STFC)

Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and

computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:

1. Turn off both your computer and monitor.

2. Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove both Digital (white

connector) and the Analog(blue connector) cables from the back of computer.

3. Turn on the monitor.

The floating 'Dell Self-test Feature Check' dialog box should appear on-screen on a black background if the

monitor cannot sense a video signal and is working correctly. While in self-test mode, the power LED remains

green. Also, depending upon the selected input, one of the dialogs shown below will continuously scroll through

the screen.

This box also appears during normal system operation if the video cable becomes disconnected or damaged.

4. Turn off your monitor and reconnect the video cable, then turn on both your computer and the monitor.

If your monitor screen remains blank after you use the previous procedure, check your video controller and computer system; your

monitor is functioning properly.

OSD Warning Messages

One of the following warning messages may appear on the screen indicating that the monitor is out of synchronization.

Cannot Display This Video Mode

file:///T|/htdocs/monitors/1907FPV/en/solve.htm[8/7/2012 10:06:59 AM]

1. Analog Input

safety

Cannot Display This Video Mode

instructions.

2.Digital Input