Dell 2209WA - UltraSharp - 22" LCD Monitor Panduan Pengguna - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Dell 2209WA - UltraSharp - 22" LCD Monitor. Dell 2209WA - UltraSharp - 22" LCD Monitor 36 halaman. 22-inch widescreen (22-inch diagonal viewable image size) flat panel monitor
Juga untuk Dell 2209WA - UltraSharp - 22" LCD Monitor: Setup Manual (2 halaman), Lembar data (2 halaman), Setup Manual (2 halaman)

Halaman Cetak

Back to Contents Page

Operating the Monitor

Dell™ 2209WA Flat Panel Monitor User's Guide

Using the Front Panel Controls

Using the On-Screen Display (OSD) Menu

Setting the Optimal Resolution

Using the Dell Soundbar (Optional)

Using the Tilt, Swivel, and Vertical Extension

Rotating the monitor

Adjusting the Rotation Display Settings of Your System

Using the Front Panel

Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls,

an OSD shows the numeric values of the characteristics as they change.

The following table describes the front panel buttons:

Front panel Button

Brightness&Contrast

Automatic

Adjust /Adjust Up

Input Source

Select/Adjust Down

Downloaded from ManualMonitor.com Manuals

Use this button to directly access the "Brightness/Contrast" menu or to increase the values of the selected menu option.

Use Auto Adjust to activate automatic setup/adjustment or to increase the values of the selected menu option.The following

dialog appears on a black screen as the monitor self-adjusts to the current input:

Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further

tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.

NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables.

Use this button to select the input source or to decrease the values of the selected menu option. Use the Input source button

to select one of the two different video signals that may be connected to your monitor:

VGA input

DVI-D input

Description