Dell D1025TM - UltraScan 1000HS - 17" CRT Display Panduan Servis - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Servis untuk Monitor Dell D1025TM - UltraScan 1000HS - 17" CRT Display. Dell D1025TM - UltraScan 1000HS - 17" CRT Display 33 halaman. Color monitor
Juga untuk Dell D1025TM - UltraScan 1000HS - 17" CRT Display: Panduan Servis (33 halaman)

Halaman Cetak

Customizing Your Monitor

4 Using the ZOOM OSD

You can enlarge or reduce the picture size using the ZOOM

OSD.

This setting is stored in memory for the current input signal.

1 Press the MENU button to display the MENU OSD.

2 Highlight the ZOOM OSD using the BRIGHTNESS and

CONTRAST buttons and press the MENU button again.

3 Press the > (CONTRAST) ?// buttons to enlarge or

reduce the picture size.

4 Press the MENU button once to return to the MENU OSD,

or press it twice to return to normal viewing.

Note

You can enlarge or reduce the picture size until either the

horizontal or vertical size reaches its maximum or minimum

value.

5 Using the OPTION OSD

You can manually degauss (demagnetize) the CRT, move the

OSD position and lock the user controls using the OPTION

OSD.

1 Press the MENU button to display the MENU OSD.

2 Highlight the OPTION OSD using the BRIGHTNESS and

CONTRAST buttons and press the MENU button again.

3 Press the ¨ (BRIGHTNESS) ./> buttons to select the

desired adjustment item.

4 Press the > (CONTRAST) ?// buttons to activate the

manual degauss, move the OSD position or lock the user

controls.

5 Press the MENU button once to return to the MENU OSD,

or press it twice to return to normal viewing.

Degauss: If a second degauss cycle is needed, allow a minimum

interval of 20 minutes for the best result.

OSD Position Change: To change the OSD position, press the

¨ (BRIGHTNESS) ./> buttons to select the direction

(horizontal or vertical), then press the > (CONTRAST)

?// buttons to move the OSD in the selected direction.

User Control Lock: Once you select "ON" to lock the user

controls, you cannot select any item except "EXIT" and

"OPTION" in the MENU OSD. If you try to access any other

OSD, the H mark appears on the screen.

To cancel the Control Lock: Repeat the above procedure and

set Control Lock to "OFF."

6 Using the SIZE OSD

You can adjust the picture size using the SIZE OSD.

This setting is stored in memory for the current input signal.

1 Press the MENU button to display the MENU OSD.

2 Highlight the SIZE OSD using the BRIGHTNESS and

CONTRAST buttons and press the MENU button again.

3 To adjust the vertical size press the ¨ (BRIGHTNESS) ./>

buttons.

4 To adjust the horizontal size press the > (CONTRAST)

?// buttons.

5 Press the MENU button once to return to the MENU OSD,

or press it twice to return to normal viewing.

7 Using the LANGUAGE OSD

You can set the OSD language to English, German, French,

Spanish or Japanese using the LANGUAGE OSD.

To reset to English, press the RESET button while the

LANGUAGE OSD is displayed.

1 Press the MENU button to display the MENU OSD.

2 Highlight the LANGUAGE OSD using the BRIGHTNESS

and CONTRAST buttons and press the MENU button again.

3 Press the ¨ (BRIGHTNESS) ./> buttons to select the

desired language.

4 Press the MENU button once to return to the MENU OSD,

or press it twice to return to normal viewing.

8 Using the GEOMETRY OSD

You can adjust the picture's geometry using the GEOMETRY

OSD.

This setting is stored in memory for the current input signal.

1 Press the MENU button to display the MENU OSD.

2 Highlight the GEOMETRY OSD using the BRIGHTNESS

and CONTRAST buttons and press the MENU button again.

3 Press the ¨ (BRIGHTNESS) ./> buttons to select the

desired geometry adjustment.

4 Press the > (CONTRAST) ?// buttons to adjust the

geometry.

5 Press the MENU button once to return to the MENU OSD,

or press it twice to return to normal viewing.

Select

ROTATION

adjust the picture rotation

PINCUSHION

adjust the picture sides

PIN BALANCE

adjust the picture side balance

KEYSTONE

adjust the trapezoidal distortion

KEY BALANCE

adjust the picture shape balance

Getting Started

Customizing Your Monitor

Resetting the Adjustments

Resetting a specific adjustment:

1 Press the MENU button to display the MENU OSD

2 Highlight the OSD containing the adjustment you want to

reset using the BRIGHTNESS and CONTRAST buttons and

press the MENU button again.

3 Press the ¨ (BRIGHTNESS) ./> buttons to select the

adjustment you want to reset.

4 Press the

(RESET) button to reset this specific

adjustment.

Resetting all of the adjustments for

the current input signal

While there is no OSD displayed, press the

(RESET)

button.

All of the adjustments for the current input signal are reset to

the factory settings.

Adjustments not affected by changes in the input signal (such

as OSD language, OSD position and the Control Lock function)

are not reset to the factory settings.

Resetting all of the adjustments for

C s

all input signals

C t

Press and hold the

(RESET) button for more than two

seconds.

All of the adjustments, including the brightness and contrast,

are reset to the factory settings.