Dell D1901Nc Panduan Pengguna - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Dell D1901Nc. Dell D1901Nc 19 halaman. 18.5" wide lcd monitor

Halaman Cetak

TECHNICAL SUPPORT (FAQ)

Problem & Question

Power LED is not on

No Plug & Play

Picture is fuzzy

Picture bounces or a wave

pattern is present in the picture

The power LED is ON (orange)

but there's no video or no

picture.

Missing one of the primary

colors (RED, GREEN, or

BLUE)

Screen image is not centered or

sized properly.

Picture has color defects

(white does not look white)

Poor brightness or contrast

Horizontal or vertical

disturbances on the screen

Possible Solution

*Check if the Power Switch is in the ON

position

*Power Cord should be connected

*Check if the PC system is Plug & Play

compatible

*Check if the Video Card is Plug & Play

compatible

*Check if the D-15 plug pin of Video

Cable is bent

*Adjust the Contrast and Brightness

Controls.

*Move electrical devices that may cause

electrical interference.

*Computer Power Switch should be in

the ON position.

*Computer Video Card should be snugly

seated in its slot.

*Make sure monitor's video cable is

properly connected to the computer.

*Inspect monitor's video cable and make

sure none of the pins are bent.

*Make sure computer is operational by

hitting the CAPS LOCK key on the

keyboard while observing the CAPS

LOCK LED. The LED should either turn

ON or OFF after hitting the CAPS LOCK

key.

*Inspect the monitor's video cable and

make sure that none of the pins are

bent.

*Adjust pixel frequency (CLOCK) and

FOCUS or press hot-key (AUTO).

*Adjust RGB color or select color

temperature.

*When the brightness of the screen lowers

after being used for a certain period and

the function of the display is affected,

send it to our authorized service center

for repair.

*Use win 95/98/2000/ME/XP shut-down

mode Adjust CLOCK and FOCUS or

perform hot- key (AUTO-key).