Dell E2016 Panduan Pengguna - Halaman 36

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Dell E2016. Dell E2016 42 halaman. 19.5' ips monitor
Juga untuk Dell E2016: Panduan Pengguna (1 halaman), Manual (8 halaman)

Halaman Cetak

Built-in Diagnostics

Your monitor has a built-in diagnostic tool that helps you determine if the screen

abnormality you are experiencing is an inherent problem with your monitor, or with your

computer and video card.

NOTE: You can run the built-in diagnostics only when the video cable is unplugged

and the monitor is in self-test mode.

To run the built-in diagnostics:

Make sure that the screen is clean (no dust particles on the surface of the screen).

Unplug the video cable(s) from the back of the computer or monitor. The monitor

then goes into the self-test mode.

Press and hold Button 1 and Button 4 on the front panel simultaneously for 2

seconds. A gray screen appears.

Carefully inspect the screen for abnormalities.

Press Button 4 on the front panel again. The color of the screen changes to red.

Inspect the display for any abnormalities.

Repeat steps 5 and 6 to inspect the display in green, blue, black, white, and text

screens.

The test is complete when the text screen appears. To exit, press Button 4 again.

If you do not detect any screen abnormalities upon using the built-in diagnostic tool,

the monitor is functioning properly. Check the video card and computer.

Troubleshooting