DHD 52/MX Panduan Instalasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Mixer Musik DHD 52/MX. DHD 52/MX 20 halaman. Series 52

Halaman Cetak

5.2

System Wiring

The mixing system consists of two main parts, which are coupled via an industry standard ethernet connection. These

parts are:

· The DSP Frame. This unit includes all input and output modules, the DSP Audio Engine, the Control Engine and the

power supply.

· The Mixing Console. This is the user interface of the mixer with all faders, control knobs, push buttons, displays and

TFT screens.

The following picture should explain the basic structure how to wire a Series 52 mixing system. Of course in reality this is

often much more complex, but the basic idea is always quite the same.

The Communication Controller RM420-852/853 in the DSP frame is the communication interface between the DSP frame

and the connected modules on one side and the ethernet network for configuration and controlling on the other side. You

can find three RJ45 connectors and one USB interface on this module.

Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part

of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.

Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.

Note

You need an RM4200D DSP Frame with at least one RM420-852/853

Communication Controller to operate an 52/MX Mixing Console.

DSP Frame and Control Desk coupled via ethernet.

Assembling and Wiring the Hardware

Version 1.10.0 - 17.03.2010