Dell UltraSharp UP3218K Panduan Servis - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Servis untuk Monitor Dell UltraSharp UP3218K. Dell UltraSharp UP3218K 14 halaman.
Juga untuk Dell UltraSharp UP3218K: Panduan Pengguna (50 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Manual Pembongkaran (6 halaman)

Built-in Diagnostics

Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you

are experiencing is an inherent problem with your monitor, or with your computer and video card.

NOTE: You can run the built-in diagnostics only when the video cable is unplugged

and the monitor is in self-test mode.

To run the built-in diagnostics:

1 Make sure that the screen is clean (no dust particles on the surface of the screen).

2 Unplug the video cable(s) from the back of the computer or monitor. The monitor

then goes into the self-test mode.

3 Press and hold Button 1 for 5 seconds. A gray screen appears.

4 Carefully inspect the screen for abnormalities.

5 Press Button 1 on the front panel again. The color of the screen changes to red.

6 Inspect the display for any abnormalities.

7 Repeat steps 5 and 6 to inspect the display in green, blue, black, white, and text

screens.

The test is complete when the text screen appears. To exit, press Button 1 again.

If you do not detect any screen abnormalities upon using the built-in diagnostic tool, the monitor

is functioning properly. Check the video card and computer.

5. Trouble Shooting Instructions