Dell 110T VS80 Panduan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyimpanan Dell 110T VS80. Dell 110T VS80 23 halaman. Dlt, vs and sdlt media handbook
Halaman Cetak
Invalid Media Symptoms - what happens when the wrong media is inserted into a drive
•
Cleaning light comes on
•
Media light flashes or stays on
•
Tape ejects
Reusing Type IV Media Formatted by DLT7000 or DLT8000 in
VS80/DLT1 Drives
•
By default, Type IV media previously recorded by a DLT7000 or DLT8000 is not read compatible with
DLT4000, DLT1, or VS80 drives
•
Cartridge automatically ejects from the DLT1 and VS80 drive
•
VS80/DLT1 drives can read Type IV media originally formatted in DLT7000 and DLT8000 drives only if
drive compression was set to 20GB. A tape formatted in 20GB mode appears as a write-protected tape and
is not writeable in a DLT1/VS80 drive. It is, however, readable. Otherwise media will continuously be
ejected from the DTL1 and VS80 drive.
•
Bulk Erasing (degaussing) Type IV media previously used in other drives results in what the drive sees as
new media and is usable in DLT1/VS80 drives.
DLT1 and VS80 Drives
•
Uses only Type IV media for read and write
VS160 Drives
•
Uses VS1 Media for read and write
•
Can read Type IV media only if media was formatted by DLT1 or VS80 drive NOT DLT4000/7000/8000.
•
Cannot write to Type IV media
•
If blank Type IV media is inserted, the media light flashes and media ejects from the drive
SDLT320 and SDLT220 Drives
•
Uses SDLT type media for read and write
•
Can backward read all Type IV media written with DLT (DLT4000, DLT7000, DLT8000, DLT1 and
VS80) drives
•
SDLT320 can read media created with the SDLT220; the 220 media light will come on
•
SDLT220 cannot read media created by SDLT320; drive gives no warning but backup software indicates
bad media.
•
Always label media with original use and formatting information
Dell DLT, VS and SDLT Media Handbook
Page 9