Dell BOSS-N1 Panduan Pengguna - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyimpanan Dell BOSS-N1. Dell BOSS-N1 36 halaman. Boot optimized storage solution-n1

Figure 3. Remove the M.2 SSD

6. Disconnect the BOSS N1 power cable and the BOSS signal cable from the system board.

NOTE:

If BOSS N1 module is installed, ensure to disconnect the BOSS N1 power cable and signal cable before removing

the Riser 1 cage.

Figure 4. Remove the BOSS power cable and BOSS signal cable from the BOSS-N1 Monolithic controller module

7. Using the Phillips #1 screwdriver remove the M3 x 0.5 x 4.5 mm screw that secures the BOSS-N1 Monolithic controller

module on Riser 1. Slide the BOSS-N1 Monolithic controller module towards the front of the chassis and lift the controller

module.

Install and remove a BOSS-N1 controllers