Dell DX6004S Panduan Memulai - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Penyimpanan Dell DX6004S. Dell DX6004S 28 halaman. Document
Juga untuk Dell DX6004S: Panduan Tambahan (4 halaman), Panduan Pengguna (46 halaman), Panduan Penyiapan dan Konfigurasi (43 halaman), Panduan Instalasi dan Konfigurasi (35 halaman), Pemberitahuan (28 halaman), Pemberitahuan (20 halaman), Ikhtisar (19 halaman), Panduan Konfigurasi (9 halaman), Panduan Konfigurasi (9 halaman), Catatan Rilis (8 halaman), Panduan Konfigurasi (7 halaman), Catatan Rilis (6 halaman), Catatan Rilis (5 halaman), Catatan Rilis (5 halaman), Panduan Memulai (49 halaman)

2.1.2. Layer 3 Switching and Routing

A router or a layer 3 switch routes network packets between subnets. A router segregates network

traffic by filtering packets based on the subnet to which they are addressed. This segregation is

important so that DX Storage nodes have predicable network bandwidth for their use and so that

their multicast and unicast traffic doesn't interfere with computers on the rest of the network.

When selecting Ethernet switching hardware, consider that many client workstations have 100Mbps

network interfaces and it might not be cost effective to connect these workstations to Gigabit ports.

Additionally, the operating systems and applications running on these workstations might be unable

to effectively utilize more than 100Mbps of bandwidth.

The following figure shows a network architecture where workstations, enterprise servers, and DX

Storage nodes are isolated on appropriately sized switches.

Version 5.0

December 2010