Dell DX6012S Panduan Pengguna - Halaman 22

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyimpanan Dell DX6012S. Dell DX6012S 46 halaman. Rack installation instructions — static rails
Juga untuk Dell DX6012S: Panduan Tambahan (4 halaman), Petunjuk Pemasangan Perangkat Keras (2 halaman), Panduan Penyiapan dan Konfigurasi (43 halaman), Panduan Instalasi dan Konfigurasi (35 halaman), Panduan Memulai (28 halaman), Pemberitahuan (28 halaman), Pemberitahuan (20 halaman), Ikhtisar (19 halaman), Panduan Konfigurasi (9 halaman), Panduan Konfigurasi (9 halaman), Catatan Rilis (8 halaman), Panduan Konfigurasi (7 halaman), Catatan Rilis (6 halaman), Catatan Rilis (5 halaman), Catatan Rilis (5 halaman), Panduan Memulai (47 halaman), Instalasi (2 halaman), Pemasangan Rak (2 halaman)

For more information about these options, see the Cluster Services Node

Installation and Configuration Guide at support.dell.com/manuals.

NOTE:

Use the Cluster Services Console for normal management and

configuration. Only experienced administrators should use the configuration files

for advanced configurations, described in the DX Object Storage Advanced

Administration Guide and the DX Object Storage Content Router Setup and

Configuration Guide. Contact your account team for professional services

consulting on advanced configurations.

DX Content Router services are not automatically configured. To enable

replication to remote clusters, publisher and subscriber services must be

configured through the DX Cluster Services console. For information about

configuring DX Content Router services, see the Cluster Services Installation

and Configuration Guide at support.dell.com/manuals.

For a complete list of reference documents, see "Additional References" on

page 43.

Adding Additional DX Storage Nodes

Before setting up the DX Storage Node, locate the Getting Started Guide for

your Dell DX6axyS system. Unpack and set up the DX platform hardware.

To set up the DX Storage Node hardware:

1 Rack and cable the DX6axyS system

2 Turn on the DX6axyS system

3 Enable capacity in the DX Cluster Services console

NOTE:

The DX Storage Node is preconfigured to network boot from the DX Cluster

Services Node. The network ports must be connected to the private network before

the system is turned on.

If the DX6axyS system includes a rail kit, locate the Rack Installation

Instructions supplied with the rail kit. Follow the instructions to install the

rails in the rack unit and to install the DX6axyS system in the rack.

Setting Up the DX Object Storage Platform