Dell DX6012S Panduan Penyiapan dan Konfigurasi - Halaman 35

Jelajahi secara online atau unduh pdf Panduan Penyiapan dan Konfigurasi untuk Penyimpanan Dell DX6012S. Dell DX6012S 43 halaman. Rack installation instructions — static rails
Juga untuk Dell DX6012S: Panduan Tambahan (4 halaman), Petunjuk Pemasangan Perangkat Keras (2 halaman), Panduan Pengguna (46 halaman), Panduan Instalasi dan Konfigurasi (35 halaman), Panduan Memulai (28 halaman), Pemberitahuan (28 halaman), Pemberitahuan (20 halaman), Ikhtisar (19 halaman), Panduan Konfigurasi (9 halaman), Panduan Konfigurasi (9 halaman), Catatan Rilis (8 halaman), Panduan Konfigurasi (7 halaman), Catatan Rilis (6 halaman), Catatan Rilis (5 halaman), Catatan Rilis (5 halaman), Panduan Memulai (47 halaman), Instalasi (2 halaman), Pemasangan Rak (2 halaman)

Halaman Cetak
Dell DX6012S Panduan Penyiapan dan Konfigurasi
Option Name
loglevel
logbackups
logsize
group
scsphosts
cluster
Copyright © 2010 Caringo, Inc.
All rights reserved
Default
20
8
10 * 1024 * 1024 bytes no
225.0.10.100
none
none
31
Mandatory
no
no
yes
yes, if cluster is not
specified
yes, if scsphosts is not
specified
Description
if local file-based
logging will be used
instead of syslog.
The level of logging
verbosity with the
following supported
values: 50=critical,
40=error, 30=warning,
20=info, 10=debug,
0=no log
The number of older,
rotated log files to
keep when file-based
logging is used.
The number of bytes
allowed for all file-
based log files. Each
log file is allocated 1/
n of the configured
logsize, where 'n' is
the configured number
of logbackups. A value
of 0 will prevent DX
Content Router from
rotating logs if an
alternate mechanism
like logrotate is
preferred.
The multicast group
address for the DX
Storage cluster to
which UUIDs should
be replicated. Must be
a Class D IP address
in the range 224.0.0.0
to 239.255.255.255.
A comma-separated
list of DX Storage
node IP addresses
used to validate
version compatibility
at boot time. Either
scsphosts or cluster
must be specified.
The name of the
target DX Storage
cluster; used to
dynamically locate
a node and verify
version compatibility at
Version 2.2
December 2010