Dell DX6012S Panduan Instalasi dan Konfigurasi - Halaman 31

Jelajahi secara online atau unduh pdf Panduan Instalasi dan Konfigurasi untuk Penyimpanan Dell DX6012S. Dell DX6012S 35 halaman. Rack installation instructions — static rails
Juga untuk Dell DX6012S: Panduan Tambahan (4 halaman), Petunjuk Pemasangan Perangkat Keras (2 halaman), Panduan Pengguna (46 halaman), Panduan Penyiapan dan Konfigurasi (43 halaman), Panduan Memulai (28 halaman), Pemberitahuan (28 halaman), Pemberitahuan (20 halaman), Ikhtisar (19 halaman), Panduan Konfigurasi (9 halaman), Panduan Konfigurasi (9 halaman), Catatan Rilis (8 halaman), Panduan Konfigurasi (7 halaman), Catatan Rilis (6 halaman), Catatan Rilis (5 halaman), Catatan Rilis (5 halaman), Panduan Memulai (47 halaman), Instalasi (2 halaman), Pemasangan Rak (2 halaman)

Parameter

IP Address

Port

Log Level

Console Password

Rules File Path

Note that a default rules.xml file is created with a 'ReplicateAll' rule. Administrators will likely wish to

customize the published channels to filter a more granular set of objects. Please reference the DX

Content Router Setup and Configuration Guide for full details on creating filter rules.

The CSN Console should be used for all configuration updates, but, for reference purposes, all

Publisher configuration parameters are stored in the configuration file: /etc/caringo/contentrouter/

publisher.cfg. This file is automatically generated and should never be manually edited unless under

direction of your support personnel.

5.1.2. Replicator

Replicator retrieves one or more lists of UUIDs from remote cluster via the Publisher service and

sends replication requests to local DX Storage nodes. To configure Replicator on the CSN, navigate

to the DX Content Router tab of the CSN Console and click on the 'Replicator' link:

Description

external network; Disable proxy communication

if subscribers will access content from the

internal network or via custom firewall rules

The read-only IP address on which the

Publisher will communicate with the local

cluster on the internal network. Remote

subscribers wishing to communicate with the

Publisher should use the external cluster IP

address for the CSN but privileged applications

on the internal network may use this IP

address.

The read-only port Publisher uses to publish

UUID data. This port must be included when

configuring remote subscribers.

The level of logging verbosity

The password used for authentication on the

Publisher console when issuing a Republish or

Republish All. Default value is 'dell'.

The name and location of the XML rules file the

Publisher uses to filter UUIDs

Version 2.0

December 2010