Dell DX6012S Ikhtisar - Halaman 17

Jelajahi secara online atau unduh pdf Ikhtisar untuk Penyimpanan Dell DX6012S. Dell DX6012S 19 halaman. Rack installation instructions — static rails
Juga untuk Dell DX6012S: Panduan Tambahan (4 halaman), Petunjuk Pemasangan Perangkat Keras (2 halaman), Panduan Pengguna (46 halaman), Panduan Penyiapan dan Konfigurasi (43 halaman), Panduan Instalasi dan Konfigurasi (35 halaman), Panduan Memulai (28 halaman), Pemberitahuan (28 halaman), Pemberitahuan (20 halaman), Panduan Konfigurasi (9 halaman), Panduan Konfigurasi (9 halaman), Catatan Rilis (8 halaman), Panduan Konfigurasi (7 halaman), Catatan Rilis (6 halaman), Catatan Rilis (5 halaman), Catatan Rilis (5 halaman), Panduan Memulai (47 halaman), Instalasi (2 halaman), Pemasangan Rak (2 halaman)

Halaman Cetak
Dell DX6012S Ikhtisar
Option Name
[log] facility
[log] hostBindInterface
[connectionPool]
maxStoredConnections
[connectionPool]
connectTimeOut
[connectionPool] poolTimeOut
[scsp] port
[scsp] hosts
[scsp] clusterName
[remote] hostsConfigFile
The following is an example of the scspproxy.cfg file:
###
# Unlabeled
# Parameter set written at 22-Dec-09 22:48
Copyright © 2010 Caringo, Inc.
All rights reserved
Value
0
localhost
200 (minimum) to 4000
(maximum)
60
300
80
192.168.1.1 192.168.1.2
For example,
cluster.example.com
/etc/caringo/scspproxy/
hosts.cfg
14
Description
The log facility (i.e. channel)
to log to when using a syslog.
Valid values are 0-6
The interface to use for log
message headers
The number of connections
the proxy saves for reuse.
Dell recommends you set this
parameter to five times the
number of DX Storage cluster
nodes.
The amount of time in seconds
to wait for a connection to be
made
The amount of time in second
an unused connection remains
in the connection pool
The SCSP port number that
the nodes in the local DX
Storage cluster are listening on
IP addresses of hosts in the
local DX Storage cluster. Note
that this is used only if the
proxy is run with --staticlocator
on a non-CSN installation.
For a CSN configuration, this
option should be commented
out.
The name of the local DX
Storage cluster for use
in discovering node IP
addresses. This must match
the configured cluster
parameter in the cluster's
configuration file.
If the Proxy is installed on a
Cluster Services Node (CSN),
the cluster parameter is
set during the initial network
bootstrap process.
The path to the location of
the hosts.cfg file on the local
server
Version 1.2
December 2010