Dell EqualLogic FS7610 Panduan Pemilik Perangkat Keras - Halaman 24
Jelajahi secara online atau unduh pdf Panduan Pemilik Perangkat Keras untuk Penyimpanan Dell EqualLogic FS7610. Dell EqualLogic FS7610 32 halaman. Appliances
Juga untuk Dell EqualLogic FS7610: Ikhtisar (7 halaman), Panduan Instalasi dan Pengaturan (46 halaman)
Halaman Cetak
Dell EqualLogic FS7610 Hardware Owner's Manual
Replacing the Appliance
If the entire NAS appliance fails, you must replace it. You will not have a functioning NAS cluster until the
appliance is replaced and configured, unless you have other NAS hardware providing the services.
Removing the appliance will cause the entire NAS cluster to be lost, requiring you to rebuild the NAS cluster
from scratch. Before replacing the entire NAS appliance, contact Dell technical support to assess the situation.
In most cases, replacing the power supply units or control modules will resolve issues.
Removing the Appliance
1. Perform the steps for detaching the controllers from the group, turning off the power, and disconnecting the
network cables in
Removing a Controller on page
2. Remove the bezel. See
3. Loosen the thumbscrews on the left and right securing the appliance to the rack.
4. Slide the appliance out of the rack and place it on a level, antistatic surface.
5. Return the failed appliance to Dell. See
Installing the Appliance
See the setup poster and the Installation and Setup Manual that were shipped with the replacement appliance for
steps on installing the system into the rack and configuring the appliance.
Returning Failed Hardware
If you receive a replacement part from your FS Series support provider, return the failed hardware in the
packaging in which the replacement part was shipped. Returning hardware in unauthorized packaging could void
your warranty.
Contact your FS Series support provider for information about returning hardware.
18
Removing the Bezel on page
Returning Failed Hardware on page
10.
14.
2 Replacing Components
18.